Filter
Top Products
Appendix - 29
MELSEC-Q
APPENDICES
!
CAUTION
Keep the cap for SSCNET connector and the tube for protecting light code end of SSCNET cable
in a plastic bag with a zipper of SSCNET
able to prevent them from becoming dirty.
Do not see directly the light generated from SSCNET connector of servo amplifier or QD75MH.
When the light gets into eye, may feel something is wrong for eye.
(The light source of SSCNET
corresponds to class1 defined in JISC6802 or JEC60825-1.)
When changing the servo amplifier or QD75MH, make sure to put cap on SSCNET connector.
When asking repair of servo amplifier for some troubles, make sure to put a cap on SSCNET
connector.
When the connector is not put a cap, the light device may be damaged at the transit.
In this case, exchange and repair of light device is required.
(2) Cable specification
(a) MR-J3BUSM
Model
name
Item
MR-J3BUS015M MR-J3BUS03M MR-J3BUS05M MR-J3BUS1M MR-J3BUS3M
Cable length 0.15m(0.49ft.) 0.3m(0.98ft.) 0.5m(1.64ft.) 1m(3.28ft.) 3m(9.84ft.)
(b) MR-J3BUSM-A
Model
name
Item
MR-J3BUS5M-A MR-J3BUS10M-A MR-J3BUS20M-A
Cable length 5m(16.40ft.) 10m(32.81ft.) 20m(65.62ft.)
(c) MR-J3BUSM-B
Model
name
Item
MR-J3BUS30M-B MR-J3BUS40M-B MR-J3BUS50M-B
Cable length 30m(98.43ft.) 40m(131.23ft.) 50m(164.04ft.)