Pelco C586M Electronic Keyboard User Manual


 
36 Pelco Manual C586M (9/99)
PROGRAMMING THE 9-CAMERA DISPLAY ( Key)
You can program two groups of nine cameras each. Both groups can be programmed to
include any nine cameras.
is not available in simplex RECORD mode.
To program the nine-camera displays:
1. Press the MAIN MONITOR key.
2. Use the number keypad to enter the address of the multiplexer (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), then press
the UNIT key.
3. Press the
key to call up a nine-camera display. If necessary, press the key
again to advance to the other nine-camera group.
4. Press the key for approximately three seconds. A bar will appear in the first
camera location of the nine-camera display, indicating that you are in the programming
mode.
5. Use the joystick to move to each camera location in the nine-camera display.
6. When the camera location that you desire is highlighted, choose the new camera by
pressing the number key for the desired camera and then pressing the CAM key.
7. To exit the programming mode, use the joystick to move the bar off the screen.
8. If necessary, repeat steps 1-7 to program the second group.
PROGRAMMING THE 16-CAMERA DISPLAY ( Key)
is not available in simplex RECORD mode.
To program the 16-camera display:
1. Press the MAIN MONITOR key.
2. Use the number keypad to enter the address of the multiplexer (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), then press
the UNIT key.
3. Press the key to call up the 16-camera display.
4. Press the key for approximately three seconds. A bar will appear in the first
camera location of the 16-camera display, indicating that you are in the programming
mode.
5. Use the joystick to move to each camera location in the 16-camera display.
6. When the camera location that you desire is highlighted, choose the new camera by
pressing the number key for the desired camera and then pressing the CAM key.
7. To exit the programming mode, use the joystick to move the bar off the screen.