Filter
Top Products
Pelco Manual C586M (9/99) 37
PROGRAMMING MENU DEFAULTS
Table F. Programming Menu Defaults
Menu Item Default
System Setup Time Display On
Title Display On
Normal Record Speed 2/6/8 Hr (NTSC/EIA)
3 Hr (PAL/CCIR)
Alarm Record Speed 2/6/8 Hr (NTSC/EIA)
3 Hr (PAL/CCIR)
Main Monitor Video (Duplex Only) Composite
Main Monitor Display High Resolution
Reset All Video Terminations To 75 Ohm
Reset All Alarm Inputs to Normally Opened
Reset All Seq Dwell Rates To 02
Reset Activity Detection All Ch To Enabled
Advanced System Date Format MM-DD-YY (NTSC/EIA)
Setup DD-MM-YY (PAL/CCIR)
Password Disabled
System Password 3916
Front Panel Control Enabled
Main Monitor Display Responds To None
Spot Monitor Display Sequence
Responds To Alarms
Aux Monitor Display (Duplex Only) Blank
Responds To (Duplex Only) Activity
Camera Types All Color (All B/W for monochrome)
Unit ID 001
Comm. Type Master (KBD-T/D) (Simplex)
Slave (Duplex)
Relay Output Alarm
Record Setup Normal Rec. Speed 2/6/8 Hr (NTSC/EIA)
3 Hr (PAL/CCIR)
Alarm Rec. Speed 2/6/8 Hr (NTSC/EIA)
3 Hr (PAL/CCIR)
VCR Type Universal
VCR Video Format Composite
VCR Switch Pulse Disabled
Record Alarms As A Priority
Alarm Record Time Alarm Duration
Playback Format Pelco
Custom VCR Normal Record Speed 2/6/8 Hr (NTSC/EIA)
Setup 3 Hr (PAL/CCIR)
Normal Switch Interval 003
Alarm Record Speed 2/6/8 Hr (NTSC/EIA)
3 Hr (PAL/CCIR)
Alarm Switch Speed 003
Camera Title Camera Number
Video Input Termination 75 Ohm
Alarm Input Normally Open
Coaxitron Format Extended (Simplex)
Off (Duplex)
Activity Detection Enabled
Activity Detection Sensitivity Med
Activity Boxes Set All
Sequence Individual Camera Dwell Time 02
Quad (2x2) Dwell Time 04
Nine (3x3) Dwell Time 04