Filter
Top Products
USING THE EFFECT FUNCTION
20
En
2 Use the effect select buttons to choose a desired image.
3 Touch the image to apply changes.
4 Use the CH SELECT dial to select the desired channel.
• In the event no input image is present, the visualizer’s image
can be used.
USING TEXT EFFECTS
TEXT effects can be instantaneously set in-sync with the BPM
(Beat Per Minute) of the track, enabling you to apply various TEXT
effects to the rhythm.
When master monitor is off
When master monitor is on
1 Touch the [BPM AUTO/TAP] button to select the BPM (=Beat
Per Minute) measurement mode.
AUTO: The BPM is automatically measured from the input
music signal.
TAP: Tap the TAP button with your finger to manually input the
BPM.
• Whenever power is first turned ON, [AUTO] is selected by
default.
•The selected mode ([AUTO]/[TAP]) will appear in the
display.
• When a BPM cannot be measured automatically, the BPM
display in the display will flash.
•The measurement range of AUTO mode is BPM=70 to 180.
Depending on the track, the BPM may not be accurately
measured. In these cases, use TAP mode to manually input
the BPM.
2 Touch the effect category button [TEXT].
•The [TEXT] button will light brightly, and the icon will move
as an animation.
• The TEXT effect screen will be displayed.
3 Select a text effect using the effect select buttons.
• The selected button will appear white, and the icon will move
as an animation.
•For a description of each effect, r efer to P. 30.
4 Choose a text from TEXT BANK.
• Rotate the VIDEO FX PATTERN/TEXT BANK dial to select
TEXT BANK and touch the [TEXT BANK] button to select the
text.
• The selected button will appear white.
5 Use the CH SELECT dial to select the channel to which you
wish to apply the effect.
• The selected effect channel display will be highlighted.
•TEXT effects are not supported when [MIC] is selected.
Effects are applied to audio only.
6 Touch the effect mode select buttons to choose the effect
mode.
• The selected button will be highlighted and an animation
will appear.
A: An effect will be applied to the audio only.
AV: An effect will be applied to both the audio and video.
V: An effect will be applied to the video only.
• When tur ning the power ON, [AV] will be selected.
1 Effect select
buttons
Select and touch the desired effect button
from the 6 TEXT effects.
2 [TEXT BANK]
buttons
Touch the text button of your choice from
the 6 texts.
3 TEXT BANK
display
Rotate the VIDEO FX PATTERN/TEXT
BANK dial to select a TEXT BANK from
the 10 available.
4 Effect mode
select button
A: Touch to apply the effect to audio only.
AV: Touch to apply the effect to both
audio and video.
V: Touch to apply the effect to video only.
1
2
5
6
3
7
8
9
4
3
1
2
4
7
5
8
9
6
3
5 Video EFFECT
monitor
Monitors the TEXT effects.
6 [TEXT EDIT]
button
Touch to edit the text of the selected
[TEXT BANK] button.
7[BPM
AUTO/TAP]
button
Touch to switch the measurement
method of the BPM between AUTO and
TAP. Pressing the TAP button will also
switch this to TAP.
8 Parameter
display
Displays the measured BPM and effect
parameters.
9Beat
button/beat
display
Touch to select the multiplication factor
of the beat calculated from the BPM for
synchronization of effects.
SVM-1000_B_En.book 20 ページ ２００７年１１月２６日 月曜日 午後１２時５４分