Filter
Top Products
HARDWARE SETUP
42
En
HARDWARE SETUP
The hardware setup values are preserved even when power is
turned OFF.
Initiate hardware setup
1 Turn the POWER switch on while pressing the UTILITY (SET
UP) button.
• Continue depressing the UTILITY (SET UP) button while the
logo mark [PIONEER PRO DJ] is displayed.
• The hardware setup screen will be displayed.
MIC SETTING
1 Touch [MIC]
The MIC setting screen will be displayed.
2 Choose settings by touching [
] or [
].
3 Touch [SAVE] to save the settings.
The settings will not be implemented unless [
SAVE
] is
touched.
SYSTEM SETTINGS
1 Touch [SYSTEM].
The SYSTEM setting screen will be displayed.
2 Choose settings by touching [
] or [
].
3 Touch [SAVE] to save the settings.
The settings will not be implemented unless [
SAVE
] is
touched.
OUTPUT TO
BOOTH MONITOR
Set whether or not to output the audio
from the MIC to the booth monitor.
TALK OVER
THRESHOLD LEVEL
Adjust the sensitivity of talk over.
TALK OVER LEVEL Adjust the level of talk over.
HI
1 0
9
8
7
6
5
4
3
2
1
0
UTILITY
(SET UP)
POWER
VIDEO SYSTEM Selects the video signal format. When
used in North America, it should be set to
NTSC (7.5 IRE).
DIGITAL OUT MAX
LEVEL
Selects the maximum level of the digital
out circuit.
SVM-1000_B_En.book 42 ページ ２００７年１１月２６日 月曜日 午後１２時５４分