Filter
Top Products
FADER START FUNCTION
35
En
FADER START FUNCTION
By connecting the optional Pioneer DJ/VJ DVD Player or DJ CD Player control cable, the channel fader and cross fader can be used to
start DVD/CD playback.
When the mixer’s channel fader lever or cross fader lever are moved, the DVD/CD player is released from the pause mode and
automatically –and instantly – begins playback of the selected track. Also, when the fader lever is returned to its original position, the DVD/
CD player returns to its cue point (back cue), thus allowing “sampler” type play.
CROSS FADER START PLAY AND BACK
CUE PLAY
When the DVD/CD player assigned to cross fader channel A is set
to standby at a cue point, moving the cross fader lever from the
right (B) side toward the left (A) side automatically starts play on
the channel A DVD/CD player.
When the cross fader lever reaches the left (A) side, the DVD/CD
player assigned to channel B goes to back cue (returns to cue
point). Also, when the DVD/CD player assigned to channel B is set
to standby at a cue point, moving the cross fader lever from the left
(A) side to the right (B) side automatically starts playback on the
channel B DVD/CD player. When the cross fader lever reaches the
right (B) side, the DVD/CD player assigned to channel A goes to
back cue (returns to cue point).
Using the Channel Fader to Start Playback
1 Press the FADER START button for the channel (1 to 4)
connected to the DVD/CD player you wish to control.
• The button for the selected channel lights.
2 Set the channel fader lever to [0].
3 Set the DVD/CD player to the desired cue point, and engage
cue point standby.
•If a cue point has already been set, it is not necessary to set
the DVD/CD player to standby at the cue point.
4 At the instant you wish to start playback, move the channel
fader lever.
•DVD/CD player begins playback.
•After playback has begun, if the channel fader lever is
returned to the [
0
] position, the DVD/CD player returns to the
cue point and re-enters standby mode (back cue).
•Playback control is possible with the channel fader only with
the CROSS FADER ASSIGN switch is set to [THRU].
Using the Cross Fader to Start Playback
1 Press the FADER START button for the channel (1 to 4)
connected to the DVD/CD player you wish to control.
• The button for the selected channel lights.
2 Set the CROSS FADER ASSIGN switch for the selected channel
to [A] or [B].
• Select [
A
] to assign to cross fader channel A (left side).
• Select [
B
] to assign to cross fader channel B (right side).
3 Move the cross fader lever to the full opposite side away
from the DVD/CD player you wish to start.
4 Set the DVD/CD player to the desired cue point, and engage
cue point standby.
•If a cue point has already been set, it is not necessary to set
the DVD/CD player to standby at the cue point.
5 At the instant you wish to start playback, move the cross
fader lever (A/B).
•DVD/CD player begins playback.
•After playback has begun, if the cross fader lever is moved
fully to the opposite side, the DVD/CD player assigned to the
opposite side channel will return to the cue point and enter
standby mode (back cue).
HI
0
9
8
7
6
5
4
3
2
1
0
FADER
START
CROSS
FADER
ASSIGN
Cross fader lever (A/B)
CHANNEL
FADER
SVM-1000_B_En.book 35 ページ ２００７年１１月２６日 月曜日 午後１２時５４分