Filter
Top Products
15
Creating a new Style
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function deletes the performance data of the specified
region. Performance data that follows the deleted region will
be moved forward to fill the gap. The performance data will
be shortened by the amount that was deleted.
1. In the “Style Edit Menu,” select “3. Delete” and press
[ENTER].
The STYLE EDIT DELETE screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter you want to change, and use the VALUE dial to
make the desired setting.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function copies the performance data of the specified
region. This is convenient when you want to re-use an existing
Style.
1. In the “Style Edit Menu,” select “4. Copy” and press
[ENTER].
The STYLE EDIT COPY =SOURCE= screen will appear.
2. Use [ ] [ ] [ ] [ ] to move to the parameter
you want to change, and use the VALUE dial to make the
desired setting.
Data Type
ALL, NOTE,
MODULATION,
PANPOT,
EXPRESSION,
REVERB,
CHORUS, PC,
PITCH BEND
Specifies the type of data
to be erased.
Note
Range Min
C– (Note Range
Max value)
Specifies the lowest pitch
to be erased. This is
available only if Data
Type is set to NOTE.
Note
Range Max
(Note Range
Min value) –G9
Specifies the highest
pitch to be erased. This is
available only if Data
Type is set to NOTE.
Deleting an unwanted region (Delete)
Parameter Value Explanation
PART
ADrum, ABass,
Acc1–6, ALL
Selects the Style part from
which data is to be
deleted.
CHORD Maj, min, 7th Selects the chord.
DIVISION
INT1–4,
MAIN1–4,
FILL1–4,
END1–4
Selects the division.
Parameter Value Explanation
From
(MEAS:
BEAT: TICK)
0001: 01: 000–
Specifies the beginning of
the region to be deleted.
To (MEAS:
BEAT: TICK)
0001: 01: 000–
Specifies the end of the
region to be deleted.
Copying performance data (Copy)
Parameter Value Explanation
SOURCE settings
SOURCE
STYLE
000
TEMPORARY
STYLE, 001–
Selects the copy-source
Style.
* 000 TEMPORARY
STYLE indicates the
Style you’re currently
editing.
PART
ADrum, ABass,
Acc1–6, ALL
Selects the copy-source
Style part.
CHORD
Maj, min, 7th,
ALL
Selects the chord.
DIVISION
INT1–4, INTALL,
MAIN1–4,
MAINALL, FILL1–
4, FILLALL,
END1–4,
ENDALL
Selects the division.
Parameter Value Explanation
Prelude_OM_Ver2.book Page 15 Wednesday, September 9, 2009 5:38 PM