Filter
Top Products
34
Creating a new song
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function deletes the performance data of the specified
region. Performance data that follows the deleted region will
be moved forward to fill the gap. The performance data will
be shortened by the amount that was deleted.
1. In the “Song Edit Menu,” select “3. Delete” and press
[ENTER].
The SONG EDIT DELETE screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter that you want to change, and use the VALUE
dial to make the desired settings.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function copies the performance data of the specified
region. This is convenient when you want to re-use existing
performance data.
1. In the “Song Edit Menu,” select “4. Copy” and press
[ENTER].
The SONG EDIT COPY =SOURCE= screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Deleting an unwanted region (Delete)
Parameter Value Explanation
Part ALL, 1–16
Selects the Song part from
which data is to be deleted.
From
(MEAS:
BEAT: TICK)
0001: 01:
000–
Specifies the beginning of the
region to be deleted.
To (MEAS:
BEAT: TICK)
0001: 01:
000–
Specifies the end of the
region to be deleted.
Copying performance data (Copy)
Parameter Value Explanation
SOURCE settings
Part ALL, 1–16
Selects the copy-
source Song part.
From
(MEAS:
BEAT: TICK)
0001: 01: 000–
Specifies the
beginning of the
region to be copied.
To (MEAS:
BEAT: TICK)
0001: 01: 000–
Specifies the end of
the region to be
copied.
Data Type
ALL, NOTE, PITCH
BEND, CC, PC
Specifies the type of
data to be copied.
Range Min
(Only when Data Type= NOTE or CC)
If Data Type= NOTE:
C–(Range Max
value)
If Data Type= CC:
0–(Range Max value)
Specifies the lowest
note (Note) or lowest
value (CC) of the
data that is to be
copied.
Range Max
(Only when Data Type= NOTE or CC)
If Data Type= NOTE:
(Range Min Value)–
G9
If Data Type= CC:
(Range Min value)–
127
Specifies the highest
note (Note) or
highest value (CC) of
the data that is to be
copied.
Prelude_OM_Ver2.book Page 34 Wednesday, September 9, 2009 5:38 PM