Filter
Top Products
19
Creating a new Style
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function replaces the specified MSB, LSB, and PC values
with different MSB, LSB, and PC values. You can also apply a
relative adjustment to the control values (Expression, Panpot,
Reverb, Chorus) within the Style.
1. In the “Style Edit Menu,” select “9. Global Change” and
press [ENTER].
The STYLE EDIT GLOBAL CHANGE screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter you want to change, and use the VALUE dial to
make the desired setting.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
Bias (TICK)
-1920–1920
(TICK)
Specifies the amount by
which the gate times are
to be modified, in units of
a tick.
Magnify 0–200%
Specifies the ratio by
which the gate times will
be modified.
Note
Range Min
C–(Note Range
Max value)
Specifies the lowest pitch
whose gate times are to
be modified.
Note
Range Max
(Note Range
Min value)–G9
Specifies the highest
pitch whose gate times
are to be modified.
Replacing performance data
(Global Change)
Parameter Value Explanation
PART
ADrum,
ABass,
Acc1–6, ALL
Selects the Style part whose
data values you want to
modify.
CHORD Maj, min, 7th Selects the chord.
DIVISION
INT1–4,
MAIN1–4,
FILL1–4,
END1–4
Selects the division.
Parameter Value Explanation
MSB
(FROM)
OFF, 0–127,
ALL
Specifies the MSB value that
is to be changed.
By choosing ALL, you can set
more than one Style part to
the same value.
MSB (TO) OFF, 0–127
Specifies the new MSB
value.
LSB (FROM)
OFF, 0–127,
ALL
Specifies the LSB value that is
to be changed.
By choosing ALL, you can set
more than one Style part to
the same value.
LSB (TO) OFF, 0–127 Specifies the new LSB value.
PC (FROM)
OFF, 1–128,
ALL
Specifies the PC value that is
to be changed.
By choosing ALL, you can set
more than one Style part to
the same value.
PC (TO) OFF, 1–128 Specifies the new PC value.
EXPRESS -127–127
Adjusts the Expression
values.
PANPOT -127–127 Adjusts the Panpot values.
REVERB -127–127 Adjusts the Reverb values.
CHORUS -127–127 Adjusts the Chorus values.
Parameter Value Explanation
Prelude_OM_Ver2.book Page 19 Wednesday, September 9, 2009 5:38 PM