Filter
Top Products
17
Creating a new Style
This function inserts blank space at the specified location.
Performance data that follows this location will be moved back
to make room for the inserted blank space. The performance
data will be lengthened by the inserted amount.
1. In the “Style Edit Menu,” select “5. Insert” and press
[ENTER].
The STYLE EDIT INSERT screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter you want to change, and use the VALUE dial to
make the desired setting.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
This function transposes the pitches of the specified region.
1. In the “Style Edit Menu,” select “6. Transpose” and press
[ENTER].
The STYLE EDIT TRANSPOSE screen will appear.
2. Use [ ] [ ] [ ] [ ] to move the cursor to the
parameter you want to change, and use the VALUE dial to
make the desired setting.
3. Select “EXECUTE” and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
Inserting blank space (Insert)
Parameter Value Explanation
PART
ADrum, ABass,
Acc1–6, ALL
Selects the Style part into
which blank space is to
be inserted.
CHORD Maj, min, 7th Selects the chord.
DIVISION
INT1–4,
MAIN–4,
FILL1–4,
END1–4
Selects the division.
From
(MEAS:
BEAT: TICK)
0001: 01: 000–
Specifies the location at
which the blank space is
to be inserted.
For (MEAS:
BEAT: TICK)
0000: 00: 000–
Specifies the length of
the blank space that is to
be inserted.
Shifting the pitch (Transpose)
Parameter Value Explanation
PART
ADrum, ABass,
Acc1–6, ALL
Selects the Style part that
is to be transposed.
CHORD Maj, min, 7th Selects the chord.
DIVISION
INT1–4,
MAIN1–4,
FILL1–4,
END1–4
Selects the division.
From
(MEAS:
BEAT: TICK)
0001: 01: 000–
Specifies the beginning
of the region to be
transposed.
To (MEAS:
BEAT: TICK)
0001: 01: 000–
Specifies the end of the
region to be transposed.
Value -127–127
Specifies the number of
semitones by which the
pitches are to be
transposed.
Note
Range Min
C–(Note Range
Max value)
Specifies the lowest pitch
to be transposed.
Note
Range Max
(Note Range Min
value)–G9
Specifies the highest
pitch to be transposed.
Prelude_OM_Ver2.book Page 17 Wednesday, September 9, 2009 5:38 PM