Filter
Top Products
97
Chapter 3. Creating Your Own Sounds
Chapter 3
12: TREMOLO-CHORUS
Tremolo Chorus is a chorus effect with added Tremolo
(cyclic modulation of volume).
fig.3-59
Pre Dly (Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the chorus sound is heard.
ChoRate (Chorus Rate)
Adjust the modulation speed of the chorus effect.
ho Dpt (Chorus Depth)
Adjust the modulation depth of the chorus effect.
Phase (Tremolo Phase)
Adjust the spread of the tremolo effect.
TrmRate (Tremolo Rate) #
Adjust the modulation speed of the tremolo effect.
Trm Sep (Tremolo Separation)
Adjust the spread of the tremolo effect.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
tremolo chorus sound. With a setting of D100:0W only the
direct sound will be output, and with a setting of D0:100W
only the tremolo chorus sound will be output.
Level (Output Level)
Adjust the output level.
13: SPACE-D
Space-D is a multiple chorus that applies two-phase
modulation in stereo. It gives no impression of modulation,
but produces a transparent chorus effect.
fig.3-60
Pre Dly (Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the processed sound is heard.
Rate #
Adjust the rate of modulation.
Depth
Adjust the depth of modulation.
Phase
Adjust the spatial spread of the sound.
LowGain
Adjust the gain of the low frequency range.
Hi Gain
Adjust the gain of the high frequency range.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
chorus sound. With a setting of D100:0W only the direct
sound will be output, and with a setting of D0:100W only the
chorus sound will be output.
Level (Output Level)
Adjust the output level.
14: STEREO-CHORUS
This is a stereo chorus. A filter is provided so that you can
adjust the timbre of the chorus sound.
fig.3-61
Pre Dly (Pre Delay Time)
Adjust the time delay from when the direct sound begins
until the processed sound is heard.
Rate #
Adjust the rate of modulation.
Depth
Adjust the depth of modulation.
Phase
Adjust the spatial spread of the sound.
Filter (Filter Type)
Select the type of filter.
OFF: a filter will not be used
LPF: cut the frequency range above the cutoff frequency
HPF: cut the frequency range below the cutoff frequency
Cutoff (Cutoff Frequency)
Adjust the basic frequency of the filter.
LowGain
Adjust the gain of the low frequency range.
Hi Gain
Adjust the gain of the high frequency range.
Balance (Effect Balance) #
Adjust the volume balance between the direct sound and the
chorus sound. With a setting of D100:0W only the direct
sound will be output, and with a setting of D0:100W only the
chorus sound will be output.
Tremolo Chorus
L in
R in
L out
R out
Balance D
Balance D
Balance W
Balance W
L in
R in
Space D
Space D
L out
R out
2-Band
EQ
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
L in
R in
Chorus
Chorus
L out
R out
2-Band
EQ
2-Band
EQ
Balance W
Balance W
Balance D
Balance D