Filter
Top Products
108
Connecting to Other Devices
Here’s how you can set the transmit channel and other MIDI-related
settings.
1.
Press the [Menu/Lesson] button.
2.
Press the cursor button to select <Functions>, then
press the [ ] button.
3.
Press the cursor button to select <MIDI>, then press
the [ ] button.
The “MIDI” screen has two pages.
4.
Press the cursor button to select the setting you want
to make.
5.
Press the cursor up or down button to change the
setting.
6.
Press the [ ] button.
Press the [ ] button one or more times to return to the Notation
screen.
■
Selecting the Transmit Channel
(Transmit Channel)
This parameter sets the MIDI channel for transmissions from the HPi-
6S. MIDI uses what are called “MIDI channels,” numbered 1–16.
Connecting to MIDI devices and setting the HPi-6S to the MIDI channel
for each device allows you to output sounds and switch tones. When
the HPi-6S is set to Dual performance (p. 57), data is transmitted only
of the channel set here.
The HPi-6S receives all channels 1–16.
■
Disconnecting the Internal Sound Generator and
Keyboard (Local Control)
When you have a MIDI sequencer connected, set this parameter to
Local Off. Since the Thru function of your sequencer will normally be
turned on, notes played on the keyboard or played back by the
recorder will be transmitted to the sound generator by the two routes
(1) and (2) shown in the illustration, causing notes to be sounded in
duplicate or to be cut off unnaturally. To prevent this, the setting called
“Local Off” is used to disconnect the route in (1).
Local On:
The keyboard and recorder are connected to the internal
sound generator.
Local Off:
The keyboard and recorder are not connected to the
internal sound generator. No sound will be produced by
the keyboard when it is played.
Making MIDI-Related Settings
Item
Explanation
Transmit Channel
Chooses the MIDI send channel.
Local Control
Switches Local Control on or off.
Composer Out
Specifies whether a recorded performance
will be transmitted to a MIDI device.
Bank Select MSB
Chooses Bank Select MSB messages.
Bank Select LSB
Chooses Bank Select LSB messages.
Program Change
Chooses Program Change messages
(Program Numbers).
Item
Explanation Setting
Transmit Channel
Chooses the MIDI send
channel.
1–16
(1)
MIDI
MIDI
MIDI
MIDI
(2)
IN
IN
OUT
OUT
Sequencer
Memory
Sound
Generator
Each note played is sounded twice
Soft Thru On
Local On
Local On
Sound is emitted
Sound Generator
Local Off
No sound produced
Sound Generator
HPi-6S-e.book 108 ページ ２００７年１１月１９日 月曜日 午前１０時３６分