Filter
Top Products
87
Convenient Functions
Functions that Can be Selected
Using the [Menu/Lesson] Button
Here’s how you can easily make changes such as tuning the HPi-6S or
changing the function of the pedals.
■
Making the Settings
1.
Press the [Menu/Lesson] button.
fig.d-Menu-e_45
2.
Press the cursor button to select the <Functions>,
then press the [ ] button.
3.
Press the cursor button to select the setting you want
to make.
Pressing the cursor left or right button switches the selected
setting horizontally; pressing the cursor up or down button
switches the selected setting vertically.
fig.Menu1-e
4.
Press the [ ] button.
The screen for the selected function appears.
5.
Press the cursor up or down button to change the
setting.
6.
When you have finished making the settings, press the
[ ] button one or more times to return to the Notation
screen.
Tone and Performance Settings
The HPi-6S is capable of reproducing a variety of the acoustic piano’s
distinctive characteristics. You can also adjust these to suit your own
taste and style.
→
Refer to “Changing the Key of the Keyboard or Song Playback
(Transpose)” (p. 69) for the procedure.
The HPi-6S is capable of reproducing a variety of the acoustic piano’s
distinctive characteristics. You can also adjust these to suit your own
taste and style.
Refer to “Making the Settings” (previous section) for the procedure.
This setting is valid when some piano sounds are selected.
■
Opening/Closing the Piano Lid (Lid)
This simulates the actual changes in sound that occur when the lid of a
grand piano is set at different heights.
■
Changing How Rapidly Sounds Are Expressed
According to the Force Used to Play the Keys
(Hammer Response)
You can adjust the timing with which sounds are produced according
to the force used to play the keys.
When a key is pressed on an acoustic piano, it causes a hammer to
move and strike the strings, producing sound. The hammers move
more slowly when the keys are played gently, meaning that sounds
are produced just slightly later than when you play the keyboard with
greater force. If the Hammer Response function is turned on, the time
between the moment you press a key until the sound is heard will
change depending on the strength with which you play. As you play
more softly, this time will become longer.
Press the cursor up or
down button
The selected setting is
switched vertically.
Press the cursor left or
right button
The selected setting is switched horizontally.
If there are any pages before or after the current page,
pressing the cursor button one or more times will
switch the display to such pages.
Changing the Key of the
Keyboard or Song Playback
(Transpose)
Adjusting the Piano Sounds
(Piano Designer)
Setting
Explanation
0–6
As the value decreases, the lid seems to close
more, producing a softer sound. Increasing the
value opens the lid more, producing a brighter
sound.
Setting
Explanation
Off, 1–10
The higher the value, the more slowly the hammers
move when the keys are played gently. When set
to Off, sounds are played immediately when the
keys are pressed, regardless of the force used to
play them.
NOTE
HPi-6S-e.book 87 ページ ２００７年１１月１９日 月曜日 午前１０時３６分