Filter
Top Products
83
Saving the Performance
Selecting the Save Number
8.
Press the cursor right button one or more times to select <Save
Destination>.
fig.RenameSong4-e
9.
Press the cursor up or down button to select the save-destination
number.
If a song name is displayed with a number, a song is already saved to that number.
If you select a number with a previously saved song and then proceed to save a new
song, the previously saved song will be erased. If you do not want to lose a saved
song, select a number with no song name indicated in the save-destination column.
Saving the Song
10.
Press the [ ] button.
Saving begins. The time required for saving ranges from several seconds to half a
minute or more. Don’t take the USB memory out of the external memory connector until
the saving process is finished.
Press [ ] button several times; the “File” screen returns to the display.
The selected setting turns orange.
Save Destination
Displays the save-destination song
number.
If you select a song number that
displays a song name, and save a new
song, the previous song will be erased.
NOTE
Never turn off the power while
the saving operation is in
progress. Doing so will damage
the HPi-6S’s internal memory or
USB memory, making it
unusable.
It’s a good idea to get into the
habit of moving the write-
protect tab (p. 10) on the
floppy disk to the “Protect”
position when you’ve finished
saving your data. Keeping the
tab at “Protect” prevents
operations that could erase
y
our songs by mistake.
HPi-6S-e.book 83 ページ ２００７年１１月１９日 月曜日 午前１０時３６分