Filter
Top Products
EM-55 OR Owner’s Manual
41
ENGLISH ENGLISH
ENGLISH ENGLISH
The [● REC] indicator, the [RECORD≈∏] icon
and the icon of the selected track flash.
(6) When the Recorder reaches the measure
where you wish to start recording, press
[● REC] again.
(7) Play the passage you want to redo.
(8) Press [● REC] again to deactivate record-
ing.
Song playback still continues, so…
(9) Press [START/STOP] to stop playback.
(10) Press [√√] to return to the measure
where you started recording, and press
[START/STOP] to listen to the new version.
If you are not satisfied, return to step (4).
Return to step (3) to correct another track.
Using a footswitch for punching in/out
You can also use an optional footswitch for
starting and stopping recording. That has
the advantage that you can use both hands
for playing (or the left hand for D Beam/
Pitch Bend/Modulation effects and the
right for playing the melody.)
(1) Connect an optional DP-2, DP-6, or BOSS
FS-5U footswitch to the FOOTSWITCH/
EXPR socket on the EM-55 OR’s rear
panel.
(2) Press and hold [FUNCTION] while pressing
BANK/NUMBER [3].
By doing so, you jump to the PAD function
(see also p. 24).
(3) Press [FUNCTION] again and turn the
[TEMPO/DATA] dial to the left to select
the following function:
(Steps (2) and (3) are a short-cut for quickly
selecting the desired function.)
(4) Wait until the VALUE message in the top
left-hand corner starts flashing, then use
the [TEMPO/DATA] dial to select Punch
I/O.
(5) Press [● REC] to return to the recording
function.
(6) Continue with step (2) under “Punch I/O”.
In steps (6) and (8), press the footswitch
(rather than the [● REC] button).
Playback functions
The [INTRO], [ORIGINAL], etc. buttons have two functions: one in Style mode (printed above the buttons),
and another one in Song mode (printed below the buttons).
Selecting the Song mode
The Style/Song control buttons have two
functions: they can be used for selecting
Music Style patterns (when the
[ARRANGER] indicator lights), or for Song
navigation (when the [SONG] indicator
lights).
To select the Song mode (and the Song con-
trol functions), you need to press the
[SONG] button. Only then will the follow-
ing functions be available.
120 001
ARRANGER CHORD
MEASURETEMPO
KEYBOARD
VELOCITY
REVERB
CHORUS
MELODY
INTELL
INVERSION
TONE
RECORD
1
9
10
2
11
3
12
4
13
5
14
6
15
7
16
8
Punch I/O
120 001
ARRANGER CHORD
MEASURETEMPO
KEYBOARD
VELOCITY
REVERB
CHORUS
MELODY
INTELL
INVERSION
TONE
RECORD
1
9
10
2
11
3
12
4
13
5
14
6
15
7
16
8
Punch I/O
Sustain
VALUE
SONG
EM-55OR_UK Page 41 Wednesday, July 10, 2002 3:32 PM