Filter
Top Products
EM-55 OR Owner’s Manual
49
ENGLISH ENGLISH
ENGLISH ENGLISH
The EM-55 OR is equipped with 64 User Program memories that allow you to store almost all settings (or
registrations) you make on the front panel and via the Function menu (see p. 44).
Note: MIDI settings (see p. 51) are not saved to a User Program because the EM-55 OR memorizes them automatically.
Writing your settings to a User Program
It is a good idea to write your settings frequently, even if you still need to do some editing afterwards.
Those intermediary saves allow you to return to the previous stage whenever you do not like your last
modifications.
(1) Press and hold the [USER PROGRAM/
WRITE] button.
The EM-55 OR now displays “Write ?”.
(2) Keep holding the [USER PROGRAM/
WRITE] button while pressing one
numeric button [1]~[8] to select the bank.
The number you select appears in the USER
PROGRAM field (“3” in the example below).
(3) Keep holding the [USER PROGRAM/
WRITE] button while pressing another (or
the same) numeric button [1]~[8] to
select the memory.
The display now responds with the “Com-
plete” message and the memory number
(your settings have been stored).
(4) Release the [USER PROGRAM/WRITE] but-
ton.
Notes about writing User Programs
Leaving the User Program environment
Press [USER PROGRAM] to leave the User
Program environment. The User Program
field in the display will go blank again.
Mode selection
The mode (Arranger, p. 13, M.Drums, p. 20,
Piano, p. 19) is also memorized when you
write a User Program.
Meaning of the “Edit” message
At some stage, you may come across an
“Edit” message next to the User Program
number.
It means that the last User Program you
selected is still in effect but that the current
settings no longer correspond to the ones in
that memory. Such changes may include
the status of the Reverb or Chorus effect, a
changed volume value, etc.
Before selecting another User Program or
switching off the EM-55 OR, you should
therefore write these settings to the same
(or a different) User Program if you want to
keep them. Otherwise, you lose these
changes. Please also see p. 50.
User Programs and Disk Links & Style
Disk
The address of the last Music Style you
selected before writing a User Program is
also memorized. This even applies to the
Style RAM memory that may contain a so-
called Style Disk Style (see p. 28). The
EM-55 OR only remembers the memory
address —
not
the name of the Style it con-
tained when you wrote your settings to a
User Program. This also applies to the Disk
Link memories in group B.
15. Working with User Programs
USER
PROGRAM
WRITE
120
12
Write?
ARRANGER CHORD
VALUE TEMPO
KEYBOARD
VELOCITY
REVERB
CHORUS
MELODY
INTELL
INVERSION
USER PROGRAM
120
11
ARRANGER CHORD
VALUE TEMPO
KEYBOARD
VELOCITY
REVERB
CHORUS
MELODY
INTELL
INVERSION
USER PROGRAM
Edit Edit
Accrdn4L
EM-55OR_UK Page 49 Wednesday, July 10, 2002 3:32 PM