Filter
Top Products
EM-55 OR Owner’s Manual
53
ENGLISH ENGLISH
ENGLISH ENGLISH
If you like, you can also record your performance (or the Recorder song) to cassette, MD, etc. To this end,
you need to connect the EM-55 OR’s STEREO OUTPUT sockets to the external device’s REC IN jacks.
Use a standard 1/4” phone cable for doing so. Another use for these outputs is to connect the EM-55 OR
to your HiFi or keyboard amplifier (such as the Roland KC-500/300/100). Using a HiFi amplifier requires
the use of an adaptor plug (phono/RCA→ 1/4” jack). If you like, you can also purchase two Roland PJ-1M
cables.
Note: By connecting the OUTPUT jacks, you do not switch off the EM-55 OR amplification system.
You can connect an optional DP-2, DP-6, or BOSS FS-5U footswitch to the FOOTSWITCH/EXPR jack in
order to hold the notes even after releasing the keys, or to perform other functions (see p. 47). If you
connect an EV-5 expression pedal instead, you can control the EM-55 OR’s volume by foot (in which
case it is no longer possible to connect a footswitch).
17. Using the outputs and an optional pedal
Roland
Cassette deck, power amplifier, HiFi
amplifier, MA series active speakers,
etc.
DP-2, DP-6, or BOSS FS-5U footswitch
EV-5 pedal
—or—
EM-55OR_UK Page 53 Wednesday, July 10, 2002 3:32 PM