Filter
Top Products
26
Backing Track Functions
3.
To exit the PERFORM MIXER screen, press [EXIT] or press
[PART VIEW] so its light is turned off.
Sync Start/Stop (SYNC buttons)
If you leave
SYNC [START]
on (button lit), the accompaniment
will start the moment you play a note at the left side of the Split
Point (i.e., in the Lower Part area).
If you leave
SYNC [STOP]
on (button lit), the accompaniment
will stop the moment you take your hand off of the Lower Part
area. This is great for songs where you need breaks (i.e. one
or several beats of silence).
To defeat this setting, press the button so it goes out.
See “Saving a Performance ([WRITE])” (p. 41).
The Style memory locations are organized as follows.
Selecting a Style
Using the VALUE dial
1.
Press [STYLE] so the button is lit.
2.
Use the STYLE SELECT buttons to select a Style by genre.
Immediately after you press one of the STYLE SELECT
buttons, the screen will show the name of the first Style in
the selected genre.
To select a User Style, press [USER].
3.
Turn the VALUE dial to step through the Styles one by one.
When the cursor in the screen is at the Style number, you can
also select a Style by turning [NUMERIC] on, using the TONE
SELECT buttons to enter a Style number, and then pressing
[ENTER].
Choosing from the Style List
1.
In the Main screen, use the cursor buttons to move the
cursor to the Style number.
2.
Press [ENTER].
3.
Use [ ] [ ] to select a Style genre.
To select a User style, select “USER” or press [USER].
4.
Use [ ] [ ] or the VALUE dial to select a Style.
5.
Press [ENTER] to set the Style.
If you press [EXIT] without pressing [ENTER], the list will
close without the currently selected Style being changed.
Adding User Styles
(Importing from USB memory)
Style data saved on USB memory can be imported into the GW-8.
Before you continue, the Style data you created on your
computer using the included “StyleConverter” software must
be saved to USB memory.
For details, refer to “Loading User Data Saved on USB
Memory (Import)” (p. 49).
Deleting a User Style
Here’s how you can delete the specified Style or all Styles
from User Style memory.
1.
Press [MENU].
2.
Use [ ] [ ] to select “Utility” then press [ENTER].
3.
Use the cursor buttons to select “Delete” then press [ENTER].
4.
Use the cursor buttons to select “Style” or “All Styles,” then
press [ENTER].
5.
If you selected “Style” in step 4, use the VALUE dial to
select the Style that you want to delete, then press [ENTER].
A confirmation window will appear.
6.
Press [ENTER] to delete the Style(s).
If you press [EXIT], you’re returned to the previous screen
without deleting the Style(s).
Parameter
Value
Explanation
LEVEL
0–127
Adjusts the volume of the Part.
MUTE
OFF,
ON
Specifies whether the sound will be
muted (ON) or heard (OFF).
SOLO
OFF,
ON
Specifies whether this Part alone will
be heard by itself (ON) or not (OFF).
Saving the Current Settings in a
Performance
Selecting a Music Style
Type
Explanation
PRST
(Preset)
These are the Styles built into the GW-8.
They cannot be overwritten.
USER
When you create Style data on your computer,
save it to USB memory, and load it into the GW-
8, it will be written into this USER area (p. 49).
GW-8_e.book 26 ページ ２００８年４月１日 火曜日 午前１１時４４分