Filter
Top Products
41
Performance Functions and Effects
Portamento
is an effect that smoothly changes the pitch from
one note to the next.
Vibrato
is an effect that uses an LFO (Low Frequency
Oscillator) to cyclically vary the pitch.
Here’s how the settings of the current Performance (including
the Tone settings you’ve edited) can be saved in the GW-8 as
a new Performance.
1.
Press [WRITE].
2.
Use [ ] [ ] to select “Performance,” and then press
[ENTER].
Input a name for your user Performance
3.
Use [ ] [ ] to move the cursor, and turn the VALUE
dial to change each character, and then press [ENTER].
Enter a Performance name of up to 16 characters.
The following characters are available.
space A–Z a–z 0–9 ! “ # $ % & ‘ ( ) * + , - . / : ; < = > ?
@ [ \ ] ^ _ ` { | }
4.
Turn the VALUE dial to select the desired destination, and
then press [ENTER].
A confirmation window will appear.
5.
Press [ENTER] to save the Performance.
If you press [EXIT], you’re returned to the previous screen
without the Performance being saved.
“Preserving Certain Settings Even When You Switch
Performances ([LOCK])” (p. 16)
“Registering Frequently Used Tones or Performances in a
Button (FAVORITE Buttons)” (p. 20)
“Style (Playing with an Accompaniment)” (p. 25)
“Bend Mode” (p. 46)
“Saving User Data to USB Memory (Backup)” (p. 49)
“Loading User Data Saved on USB Memory (Import)” (p. 49)
Portamento
Switch
OFF,
ON,
TONE
Specifies whether portamento
will be applied (ON) or not
(OFF). When “TONE” is
selected, the Tone’s own settings
take effect.
Portamento
Time
0–127,
TONE
Adjusts the speed at which the
pitch will change when
portamento is used. Higher
settings will lengthen the time over
which the pitch changes to the next
note. When “TONE” is selected,
the Tone’s own settings take effect.
Pitch Bend
Range
0–24,
TONE
Specifies the range of pitch
change that can be controlled
using the Pitch Bend controller.
When “TONE” is selected, the
Tone’s own settings take effect.
Hold Pedal
Switch
ON, OFF
Specifies whether the hold
pedal will apply to the Tone
(ON) or will not apply (OFF).
Control
Pedal
Switch
ON, OFF
Specifies whether the control
pedal will apply to the Tone (ON)
or will have no effect (OFF).
This is enabled when “Pedal
Assign” in “System settings” is set
to EXPRESSION, SOSTENUTO,
or SOFT (p. 46).
Parameter
Value Explanation
Saving a Performance ([WRITE])
Button
Explanation
[0]
Selects the type of character. Each time you press
this, you will alternately select the first character of a
character set: uppercase (A), lowercase (a), or
numerals and symbols (0).
[1]
Deletes the character at the cursor location.
[2]
Inserts a space at the cursor location.
Other Functions Related to Performance
GW-8_e.book 41 ページ ２００８年４月１日 火曜日 午前１１時４４分