Filter
Top Products
55
Error Messages
If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear.
Refer to the explanation for the error message that appears, and take the appropriate action.
Message
Meaning Action
USB Memory Not Ready!
USB memory is not connected.
Connect USB memory.
Read Error!
The data could not be read.
Load the data once again.
Failed to load data from USB memory. Make sure that USB memory is correctly connected.
It may be that the file is damaged. Do not use this file.
This file cannot be loaded since its format is in-
correct.
Do not use this file.
Write Error!
Failed to write the data.
Write the data once again.
Failed to write data to USB memory. Make sure that USB memory is correctly connected.
Data cannot be written because the USB mem-
ory has no more free space.
Delete unneeded files from the USB memory. Alter-
natively, use a different USB memory device, one
that has more free space available.
The file or the USB memory itself is write pro-
tected.
Make sure that the file or the USB memory is not
write protected.
Incorrect File!
This is a file that the GW-8 is unable to play.
Do not use this file.
This song has not been transferred from Playl-
ist Editor to USB memory.
Select the song for transfer from Playlist Editor, and
transfer the data once again to USB memory.
The file uses a sampling rate that the GW-8
cannot play.
Use a song whose sampling rate is 44.1 kHz.
System Memory
Damaged!
It is possible that the contents of system mem-
ory have been damaged.
Please execute a Factory Reset.
If this does not resolve the problem, contact your
dealer or a nearby Roland service center.
File Not Found!
The file was not found in user memory.
Save the file once again in user memory.
The file was not found in USB memory. Save the file once again in USB memory.
MIDI Buffer Full!
An unusually large amount of MIDI data was
received, and could not be processed.
Reduce the amount of MIDI messages that are being
transmitted.
MIDI Offline!
The MIDI IN connection was broken.
Check that there is no problem with the MIDI cable
connected to the GW-8’s MIDI IN, and that the MIDI
cable was not disconnected.
Now Playing!
The Style/Song/USB Memory Player is cur-
rently playing.
Either stop playback, or wait until playback has end-
ed.
Now Recording!
That operation cannot be executed because
recording is in progress.
Either stop recording, or wait until recording is fin-
ished.
Memory Full!
The Style/Song could not be saved because
there is insufficient user memory.
Delete unneeded user data.
Cannot Record!
Recording could not be started.
You cannot record if BACKING TYPE [USB MEMO-
RY PLAYER] is on. Set BACKING TYPE to something
other than [USB MEMORY PLAYER].
Cannot Store Anymore
Styles!
No more Styles can be saved.
Please delete unneeded user Styles.
Cannot Store Anymore
Songs!
No more Songs can be saved.
Please delete unneeded user Songs.
GW-8_e.book 55 ページ ２００８年４月１日 火曜日 午前１１時４４分