Filter
Top Products
Selecting a Patch
When you select a Patch, the sound assigned to each pad and the settings for MIDI, effect and pedal will
all change instantly. Try each of the 99 factory-preset Patches to hear the different possibilities.
To select Patches first make sure you are in the Play mode. Then use the PATCH/VALUE [-] or [+] but-
tons to select Patches. The number of the selected Patch will appear in the display.
Pressing PATCH/VALUE [+] while holding down PATCH/VALUE [-] (or vice versa) causes the
Patch numbers to change more rapidly.
fig.10
The factory patch names are listed on p. 93.
What is a Patch?
A Patch contains data determines how each pad sounds, settings for the effects and also MIDI settings.
The SPD-20 can store 99 different Patches.
fig.11
When you select a Patch, the settings for each pad are instantly changed (p. 15).
You can also use MIDI Exclusive messages to store Patch data in an external sequencer or other
device (p. 75).
MEMO
Pad 2
External Pads
1-4
Pad 3 Pad 4
Pad 6Pad 5 Pad 7 Pad 8
Internal Pads 1-8
+
Patch 99
Patch 1
Sound Parameters
• Instrument
• Level
• Pitch
• Decay
• Pan
• Velocity Curve
• Effect Send
MIDI Parameters
• Transmit Channel
• Note Number
• Gate Time
• Pan
• Velocity Curve
• Velocity Sensitivity
• Program Change
Pad 1
•
•
Hi-Hat Control PedalEffects
Pad 1
MEMO
14