Filter
Top Products
fig.23 fig.24
When CSt is selected, the unit sounds at maximum volume, regardless of how hard you strike the pad.
Adjusting the Effects Depth (FX SEND)
This parameter determines the depth (0–15) of the effect applied to each Instrument assigned to the pad.
Higher settings will result in a deeper effect. With a setting of 0 there will be no effect. The overall
effects level for a Patch is determined by FX LEVEL in the FX/PEDAL parameter group.
fig.25
This FX SEND parameter will have an audible result only if the [FX ON/OFF] setting is on, and FX
LEVEL in the FX/PEDAL parameter group is set above 0.
+
Pad Bank A
Pad Bank B
Velocity Crossfade
Velocity Switch
Hard 1Soft 1
Hard 3Soft 3
+
Pad Bank A
Pad Bank B
MEMO
FX SEND
Sound Generating
section
Effects section
PAN
LEVEL
L/MONO
R
OUTPUT
FX LEVEL
NOTE
25
1
2
3
4
5