Filter
Top Products
102
Effect List
12: COMP-ENHANC (Compressor + Enhancer)
Produces the effect of a serially connected a compressor and an enhancer. The enhancer sharpens sound to accentuate it.
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Parameter Value Descriptions
CP Thrshd -60–+12 dB Level at which the compressor effect starts to be applied
CP Ratio 1.0:1, 1.2:1, 1.5:1,
2.0:1, 2.8:1, 4.0:1,
8.0:1, 16.0:1, INF:1
Rate of output compression when the compressor input level exceeds CP Thrshd
(INF: infinite)
CP Atack 0.25–100 ms Duration from the time when the compressor input level goes above CP Thrshd to the
start of the effect
CP Relese 50 ms–5.00 s Duration from the time when the compressor input level goes below CP Thrshd to the
end of the effect
CP Gain -6.0–+18.0 dB Amplification/attenuation of the compressor output sound
EH Sens 0–127 Rate of the enhancer effect
EH MixLevel 0–127 Volume of the sound generated by the enhancer
EQ Low -12.0–+12.0 dB Amplification/attenuation at low frequency
EQ High -12.0–+12.0 dB Amplification/attenuation at high frequency
Value
Parameters controlled with Knob, Velo and Pedal
(See the table above for details.)
Descriptions
OFF
— —
EH SENS EH Sens —
EH MIXLEV EH MixLevel —
COMPRESS CP Thrshd, CP Ratio, CP Gain The rate of level compression is controlled.
PRESENCE EH Sens, EH MixLevel, EQ High The rate of high-frequency emphasis for accentuation is
controlled.
SPDS_e.book 102 ページ ２００４年４月１９日 月曜日 午前９時５８分