Filter
Top Products
114
Effect List
29: SHORTLOOPER (Short Looper)
Loops the input sound at a short cycle.
The timing for playing back the looped sound can be automatically synchronized with the tempo of the wave played back. (Effect
synchronization (Phrase Sync) -> p. 116)
It is effective for accentuation of rhythm loops.
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Parameter Value Descriptions
LoopSw OFF, ON If this switch is turned ON while a sound is produced, the SPD-S plays back the sound looped
at the moment. If this switch is turned OFF, the loop is cancelled and the original sound is re-
produced. When you want to manually control the timing of playback of the looped sound, con-
trol this parameter with the EFFECTS CONTROL knob, etc.
LoopLength 0–127 Length of the loop
Tempo 20–260 Tempo
* You can also define the tempo by controlling the intervals at which you hit a pad or depress
a foot switch. (Tap Tempo: Ctrl SW in CONTROL SW in Setup Edit -> p. 79)
PhraseSync OFF, ON Phrase sync switch (Effect synchronization (Phrase Sync) -> p. 116)
Timing OFF, 1–16 Timing in a measure at which the looped sound is played back (specified in sixteenth note
units). When it is set to OFF, no looped sound is automatically played back.
Hold
3
3
3
Duration of reproducing the looped sound specified in note length
Value
Parameters controlled with Knob and Pedal (See the table above for details.)
OFF
—
LOOPSW LoopSw
TIMING Timing
LOOPLENGTH LoopLength
HOLD Hold
Value
Parameters controlled with Velo (See the table above for details.)
OFF
—
LOOPSW LoopSw
LOOPLENGTH LoopLength
SPDS_e.book 114 ページ ２００４年４月１９日 月曜日 午前９時５８分