Filter
Top Products
115
Effect List
Appendices
30: SLICER
Cuts the sound in succession. The timing of the sound cutting can also be automatically adjusted to the tempo of the wave that is
played back. (Effect synchronization (Phrase Sync) -> p. 116) Includes a flanger effect.
fig.Var16
In addition, if you press the PAGE buttons, “Knob,” “Velo” and “Pedal” are displayed. You can then select the parameters to be
controlled with the EFFECTS CONTROL knob, the strength (velocity) used in hitting a playing surface, and the expression pedal.
Parameter Value Descriptions
Tempo 20–260 Tempo
* You can also define the tempo by controlling the intervals at which you hit a pad or de-
press a foot switch. (Tap Tempo: Ctrl SW in CONTROL SW in Setup Edit -> p. 79)
PhraseSync OFF, ON Phrase sync switch (Effect synchronization (Phrase Sync) -> p. 116)
Variation VAR01–VAR16 Variation in timing of cutting off a sound (See the diagram)
Rate x1, x2, x4, x8 Duration of the variation
x1: One measure as one cycle
x2: 1/2 measure as one cycle
x4: 1/4 measure as one cycle
x8: 1/8 measure as one cycle
Flanger 0–127 Flanger effect
Value
Parameters controlled with Knob and Pedal (See the table above for details.)
OFF
—
TEMPO Tempo
RATE Rate
FLANGER Flanger
Value
Parameters controlled with Velo (See the table above for details.)
OFF
—
FLANGER Flanger
VAR01
VAR02
VAR03
VAR04
VAR05
VAR06
VAR07
VAR08
VAR09
VAR10
VAR11
VAR12
VAR13
VAR14
VAR15
VAR16
SPDS_e.book 115 ページ ２００４年４月１９日 月曜日 午前９時５８分