Filter
Top Products
28
Creating a drum kit
“Ambience” allows you to choose the environment where the drums are being played. You can adjust room size, wall material and
the position of the ambience mics. The “Equalizer” is used to adjust the overall tone.
1. Press [KIT]-[F1] (INST).
The “INST” screen appears.
2. Press [F3] (AMB/EQ).
3. Press [F1] or [F3] to select the parameter you want to
edit.
[F1] (AMB):
Ambience
[F3] (EQ):
Equalizer
4. Use CURSOR [ ] [ ] to select a parameter.
5. Use [+/-] or [VALUE] to edit the value of the
parameter.
6. Press [EXIT] several times to return to the “DRUM
KIT” screen or just press [KIT].
Each pad has an individual ambience send level.
3. Press [F2] (SEND).
The AMBIENCE SEND screen appears.
4. Hit the desired pad or use CURSOR [ ] [ ] to
select a pad.
5. Use CURSOR [ ] [ ] to switch between HEAD and
RIM.
6. Use [+/-] or [VALUE] to adjust the ambience the send
level.
Value: 0–100
7. Press [EXIT] several times to return to the “DRUM
KIT” screen or just press [KIT].
Using the onboard effects (AMB/EQ)
Screen Parameter Value
[F1] (AMB)
Type
OFF, LIVING, BATH, STUDIO, GARAGE, LOCKER, THEATER, CAVE,
GYM, DOME
Size
TINY, SMALL, MEDIUM, LARGE, HUGE
Wall
WOOD, PLASTER, GLASS
Mic
LOW, HIGH
Shape
0–100
Level
0–100
[F3] (EQ)
Switch
ON, OFF
High Freq
1–8 kHz
High Gain
-12– +12
Low Freq
20 Hz–1 kHz
Low Gain
-12– +12
Adjusting the ambience for each pad (SEND)
TD-9_e.book 28 ページ ２００８年１月２３日 水曜日 午後４時２４分