Filter
Top Products
52
MIDI-related settings
Local Control
OFF, ON
Turns the Local Control on/off.
This is required when you want to trigger sounds in an external sound module and/or record
your performance on an external MIDI sequencer, and NOT use the TD-9’s internal sounds.
If that is your need, then turn Local Control to “OFF.” When recording/using TD-9 perfor-
mances on an external sequencer, turn Local Control to “OFF” and be sure the sequence’s
MIDI OUT is connected to the TD-9’s MIDI In.
The trigger signals from the pads go directly to the MIDI OUT/THRU connector.
The TD-9’s default mode is with Local Control “ON.”
If you make connections and record as shown, with a setting of Local Control “ON,” dupli-
cate notes will be re-transmitted to the TD-9 and will not be played correctly.
Soft Thru
OFF, ON
Turns the Soft Thru function on/off.
This explains how you can use the Roland SPD-20 (a MIDI controller) together with the TD-
9’s pads to play internal sounds and an external sound module.
When Soft Thru is set to “ON,” the messages received at MIDI IN will also be transmitted
from the MIDI OUT/THRU connector.
Parameter value Description
Pad
Internal Sound Generator
TD-9
OUT
Trigger
IN
IN
OUT
Trigger → MIDI
Converter
MIDI Sequencer
(Soft Thru: ON)
Local Control:
OFF
MIDI
OUT/THRU
MIDI
IN
SPD-20
Pad or Pedal
MIDI Sound Module
TD-9_e.book 52 ページ ２００８年１月２３日 水曜日 午後４時２４分