Filter
Top Products
54
MIDI-related settings
A collection of different percussion instruments is called a
percussion set
. A different percussion instrument is assigned to each note
number, and multiple instruments can be used together.
The percussion part is to CH11 (fixed).
Select an instrument for each note number.
1. Press [SETUP]-[F2] (MIDI).
The “MIDI” screen will appear.
2. Press [F2] (PERC).
The “PERCUSSION SET EDIT” screen appears.
3. Use CURSOR [ ] [ ] to select a note number.
4. Use [+/-] or [VALUE] to select an instrument.
You can get a preview by holding down [SHIFT] and
pressing [KIT].
Set the volume, pan, pitch, decay, etc. for each percussion instrument.
1. In the “PERCUSSION SET EDIT” screen, select the
instrument whose settings you want to edit.
2. Press [F1] (EDIT).
The “PERCUSSION INST EDIT” screen appears.
3. Use CURSOR [ ] [ ] to select the parameter.
* You can use CURSOR [ ] [ ] to switch note numbers.
4. Use [+/-] or [VALUE] to edit the value.
You can get a preview by holding down [SHIFT] and
pressing [KIT].
5. Press [EXIT] several times to return to the “DRUM
KIT” screen or just press [KIT].
Editing a percussion set [F3] (PERC)
Editing the Percussion Set
Individual Percussion Instrument Parameters
Parameter value Description
Instrument
001–523
Selects the instrument that will be assigned to the currently selected note number.
Volume
0–100
Specifies the volume of each instrument.
Pan
L15–CENTER–R15
Specifies the panning of each instrument.
Pitch
-240– +240
Specifies the pitch of each instrument.
Decay
1–100
Specifies the duration (decay time) of each instrument.
Amb Send Level
0–100
Specifies the ambience depth of each instrument.
CC
0–127
Adjusts the openness of the hi-hat.
* This is valid only if the Instrument is “HH.”
TD-9_e.book 54 ページ ２００８年１月２３日 水曜日 午後４時２４分