Filter
Top Products
46
Optimizing the pad settings
(Trigger parameters)
1. Press [SETUP].
[SETUP] will light and the “SETUP” screen will appear.
2. Press [F1] (TRIG).
3. Press [F1]–[F3] to choose the item that you want to
edit.
4. Use [CURSOR] to select a parameter.
5. Use [+/-] or [VALUE] to set the value of the
parameter.
6. Press [EXIT] several times to return to the “DRUM
KIT” screen or just press [KIT].
For each trigger input, you can select the type of pad you’re
using (
the trigger type
) so the TD-9 will accurately receive the
signal from the pad.
Trigger type
The trigger type
is a collection of parameters optimized for
specific models of pad.
In the above screen, indications such as “KD8,” “PD85,” and
“VH11” are the trigger types.
If you select the appropriate trigger type for each pad you’ve
connected, all parameters (except for Crosstalk Cancel) will be
set to the optimal values.
However, these are only the typical values, so you may need to
make fine adjustments according to how you’ve attached the
pads or the way in which you’re using them.
You can change the default trigger type settings that are
specified when you execute a Factory Reset. For details,
refer to p. 61.
Specifying the type of pad [F1] (TYPE)
Trigger Type
Used Model
KD7
KD-7
KD8
KD-8
KD85
KD-85, KD-80
KD120
KD-120
PD8
PD-8
PD85
PD-85, PD-80R, PD-80
PD105
PD-105
PD125
PD-125
PDX8
PDX-8
CY5
CY-5
CY8
CY-8
CY12RC
CY-12R/C
CY14C
CY-14C
CY15R
CY-15R
VH11
VH-11
RT10K
RT-10K
RT10S
RT-10S
RT10T
RT-10T
Dual trigger support for each pad
Trigger Input
Mesh Pad (Dual Trigger)
KICK
–
SNARE
O
TOM 1–3
O
HI-HAT
–
CRASH 1–2
–
RIDE
–
BELL
–
AUX
O
Trigger Type Used Model
TD-9_e.book 46 ページ ２００８年１月２３日 水曜日 午後４時２４分