Filter
Top Products
32
Playing the VR-700
3. Assigning an ensemble sound to the lower part
For ensemble sound 1
In the same way as when using just one ensemble sound (p. 30),
press the [TO LOWER/PEDAL] button; the lower part will switch to
ensemble sound 1, and the [TO LOWER/PEDAL] button will light.
For ensemble sound 2
Hold down the button of ensemble sound 2 and press the [TO
LOWER/PEDAL] button; the lower part will switch to ensemble
sound 2.
fig.ens-assign16.eps
The [TO LOWER/PEDAL] button indicates the status of
ensemble sound 1. If you hold down the button of ensemble
sound 2, the [TO LOWER/PEDAL] button will instead indicate
the status of ensemble sound 2.
4. Assigning an ensemble sound to the pedal part
For ensemble sound 1
In the same way as when using just one ensemble sound (p. 30), the
ensemble sound is assigned to the Pedal part by holding down the
[TO LOWER/PEDAL] button and pressing the [–] button.
The [TO LOWER/PEDAL] button will light and “Pd” will be shown in
the display.
For ensemble sound 2
To assign the Ensemble 2 sound to the Pedal part, hold down both
the Ensemble 2 button and the [TO LOWER/PEDAL] button while
you press the [–] button.
If you hold down the [LOWER] and [UPPER] buttons and press
the [SPLIT] button, the Split function will turn on, allowing you
to play the upper part in the higher range of the keyboard and
the pedal part in the lower range of the keyboard (p. 28).
Lights green:
Ensemble sound 2
VR-700_e.book 32 ページ ２００９年１１月１８日 水曜日 午前９時２４分