Filter
Top Products
79
Error Messages
Indication
Situation Action
E.02
An error occurred during writing.
The external media may not yet be initialized.
E.10
No external media is inserted.
Insert the external media and try again.
E.11
Not enough free space at the save destination.
Insert other external media or delete unneeded files, and try
again.
E.14
An error occurred during writing.
The external media may be corrupted.
Insert other external media and try again. Alternatively, you can
initialize the external media.
E.15
The file is unreadable. The data format is not compatible with the VR-700.
E.16
Data was not called up in time for playback of the song.
You may be able to play the song after waiting a few seconds.
E.18
This audio format is not supported.
For details on the format of songs that can be played back by the
VR-700, refer to “Specifications” (p. 80).
E.30
The internal memory of the VR-700 is full.
–
E.40
The VR-700 cannot deal with the excessive MIDI data sent from
the external MIDI device.
Reduce the amount of MIDI data sent to the VR-700.
E.41
A MIDI cable has been disconnected.
Connect it properly and securely.
E.43
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
E.51
There may be a problem with the system.
Repeat the procedure from the beginning. If it is not solved after
you have tried several times, contact the nearest Roland service
center.
E.65
The USB MEMORY connector was subjected to excessive current.
Make sure that there is no problem with the external media, then
turn the power off, then on again.
VR-700_e.book 79 ページ ２００９年１１月１８日 水曜日 午前９時２４分