Filter
Top Products
62
Various Settings (Function mode)
Here’s how to format USB memory. Before newly purchased USB memory or USB memory that was used with another product can be
used with the VR-700, that USB memory must be formatted using the following procedure.
• USB memory that was formatted by a computer cannot be used by the VR-700. USB memory to be used by the VR-700 must be
formatted by the VR-700.
When you format USB memory, all data stored on that USB memory will be deleted. Be sure to back up any important data to
your computer before you proceed.
1.
Press the [FUNCTION/ENTER] button.
The VR-700 will enter Function mode, and the display will indicate
.
2.
Press the [+] button until the display indicates
.
3.
Press the [E.PIANO] button.
The display will indicate
.
4.
Press the [FUNCTION/ENTER] button.
The display will indicate
.
5.
To execute the Format operation, press the [FUNCTION/ENTER] button.
During formatting the display will indicate
.
Never switch off the VR-700’s power while formatting is being performed.
If you decide not to execute the Format operation, press [DISPLAY/EXIT].
6.
When formatting is completed, the Function mode screen will reappear.
Formatting USB Memory
VR-700_e.book 62 ページ ２００９年１１月１８日 水曜日 午前９時２４分