Filter
Top Products
TAC AB, 2003-07-01 0-004-7771-2 (GB), 7 (36)
TAC Xenta 400 I/O modules 1 Introduction
1 Introduction
1.1 TAC Xenta 400 I/O modules
The TAC Xenta 400 is a series of input/output modules designed to be
connected to the TAC Xenta 300 or 401 type controllers.
The installation procedures and technical data are similar between the
different modules.
Please note!
The TAC Xenta 400 I/O modules and the other products of the
TAC Xenta family must not be used for any other purpose than those
for which they were designed.
Installation, connection and repair may only be performed by
authorized personnel.
1.2 This manual
The manual has the following contents:
Chapter 2
This chapter contains general information about the TAC Xenta 300
and 401 controllers and the associated I/O modules.
Chapter 3
This chapter contains technical information about the TAC Xenta 400
I/O modules.
Chapter 4
This chapter contains information about how to install the I/O modules
of the TAC Xenta 400 series.
At the end of the manual there is a reply form, which you can fill in if
you have any comments.