Filter
Top Products
27
EN
Recording
3 Set the channel 2 ASSIGN switch and PAN knobs
to direct the sound to track 1.
(Set the chorus vocals input from channel 2 to be
recorded on track 1.)
4 Press down the channel 1 INPUT switch.
(Input the playback sound from the recorder
(TRACK 1) to channel 1.)
5 Set the channel 1 ASSIGN switch and PAN knobs
to direct the playback sound from the recorder to
track 1.
(Set the playback sound from the recorder to be
recorded on track 1.)
6 Prepare the monitor.
• Press the monitor track key corresponding to
the group path selected in steps 3 and 5 (in this
case, press down the 1-2 button).
• If you want to monitor the sound of tracks 2
and 3 press the CUE key.
• Turn the MONITOR knob and the TRACK
knob(s) to adjust the sound to a level that can be
monitored.
7 Input a loud phrase and use the channel 2 TRIM
knob to adjust the recording level.
8 Press ( PLAY.
Playback begins.
Mix Write Recording (Basics)
You can record other sounds on top of a previously
recorded track.
The following is an explanation of the mix write
concept.
EXAMPLE: Recording a chorus on top of the vocals
recorded on track 1.
Since the vocals recorded on track 1 are all
assigned to channel 1, connect the microphone to
another channel’s input jack.
During recording, the chorus vocals are mixed
with the original vocals and recorded to track 1.
Preparations for recording
EXAMPLE: Recording a chorus on top of the vocals
recorded on track 1. (For this example we will
input the chorus to the INPUT CH2 jack.)
1 Set the channel 2 INPUT switch to LINE/MIC (up
position).
(Set channel 2 to receive the input sound).
2 Set the fader for channel 2 to about 7 or 8.
(continued)
Record chorus
ASSIGN ASSIGN ASSIGN ASSIGN
PANPANPANPAN
1 2 1 2 1 2 1 2
L R L R L R L R
3 43 43 43 4
Press down
ASSIGN ASSIGN ASSIGN ASSIG
N
PANPANPANPAN
1 2 1 2 1 2 1
L
R
L R L R L R
3
3 43 43 4
Press down
Turn all the
way toward
“L”.
Turn all the
way toward
“L”.
8
10
14
7
8
6
2
9
11
3
5
b
Previously
recorded vocals
Chorus /
vocal mix