Filter
Top Products
Quick Guide
CP300 Owner’s Manual
32
Basic Operation
4 Specify the split point (the border between the right- and left-hand range).
The default setting (factory setting) is “F#2.” (If you do not need to change the split point, skip this
step.)
To Change the Split Point Setting
4-1 Simultaneously hold down the [SPLIT] button and use the D [–][+] buttons to specify
the split point.
There is also a quicker, more intuitive way: instead of using the D [–][+] buttons, simultaneously hold
down the [SPLIT] button and press the appropriate key on the keyboard.
n The Main part and Layer part of the split point are specified simultaneously. If you wish to independently change
the split point for each part, you can call up the Other Settings menu and use the “Split Point” parameter to set the
Main part split point and use “Split Point 2” to set that of the Layer part (page 69).
4-2 Release the [SPLIT] button to return to the main display.
5 Press the [SPLIT] button to exit Split and return to normal play.
F
#
2
Center “C” (C3)
SplitPoint
F#2
NO YES
A
B
DC
Split point