Filter
Top Products
Message List
CP300 Owner’s Manual
96
Appendix
Do you want to overwrite the data?
This message prompts you to select whether you wish to overwrite the existing data with
new data. Press the B [+ (YES)] button to allow overwriting. Press the B [– (NO)] button to
cancel.
Please wait.
You tried to start playing a Song or perform another operation right after selecting the Song.
Wait until the message closes.
This is a protected file.
You tried to copy or delete data in internally-protected files (such as commercially available
music data). You cannot write to, copy, or delete such files.
This is a protected Song.
This message appears when you try to change the name of an internally-protected Song
(Preset Song). You cannot change the name of such Songs.
Is the setting maintained?
This message prompts you to select whether you wish to save the edited settings or not.
Press the B [+ (YES)] button to save the settings. Press the [EXIT] button to cancel.
The Song has been changed. Do you wish to save the Song?
You tried to perform another operation before saving the recorded Song to storage memory.
If you continue the operation, the recorded Song will be lost. To delete the new recording,
press the B [– (NO)] button. To keep the recording, press the B [+ (YES)] button. The “Save
To Memory” (page 82) parameter is shown in the display. Save the Song then try the
operation again.
An error has been found in the Song data.
1. The instrument has found some defects in the selected (or playing) Song. Select the
Song and play it again. If you still see this message, the Song data may be damaged.
2. This message will appear if a different “Character Code” (page 84) is selected than was
when you assigned the Song name. In this case, switch the “Character Code,” re-select
the Song, and play it back.
The Song data is too large.
1. The Current memory space has become full during recording. Recording stops
automatically. The data recorded up to that point remains. This message also appears
when you try to enter recording mode to perform additional recording but the Song data
has already filled the current memory. In this case, you cannot perform additional
recording. Use the “Channel Clear” parameter (page 86) to delete unnecessary tracks (if
any) to make more room in memory.
2. The size of the selected Song is larger than the current memory. The instrument cannot
load/play the selected Song. Select another Song.
3. This message is shown when you edit a Song if that Song is larger than the capacity of
the current memory. This Song cannot be edited on the instrument.
Do you wish to start the operation?
This message prompts you to start the operation. To start, press the B [+ (YES)] button.
Press the [EXIT] button to cancel the operation.
Are you sure?
This message prompts you to confirm the execution. Press the B [+ (YES)] button to
continue. Press the B [– (NO)] button to cancel.
MIDI bulk data is being transmitted.
This message appears when the instrument receives a bulk request from a computer. This
message appears while the bulk data is being transmitted. Wait until the message closes,
then go on to the next step. Please wait.
Bulk data transmission has been completed.
This is shown following the “Transmitting” message. It is displayed when the transmission of
the bulk data has been completed. You can go on to the next step.
Message Description
OverWrite?
PleaseWait
ProtectedFile
ProtectedSong
Set?-->
SongChanged Save?
SongError
SongError
SongTooBig
SongTooBig
Start?-->
Sure?-->
Transmitting
Transmitting
Completed