Filter
Top Products
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Reference
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO YES
A
B
DC
Main Set?-->
RotarySpeed Slow
NO YES
A
B
DC
Main Set?-->
Dry/WetBalance D58>W
NO YES
A
B
DC
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO YES
A
B
DC
Main Set?-->
HarmonicContent 0
NO YES
A
B
DC
Main Set?-->
EQ LowFreq. 80
NO YES
A
B
DC
Main Set?-->
EQ LowGain 0
NO YES
A
B
DC