Filter
Top Products
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
61
Reference
This allows you to adjust the high-range frequency of the
part EQ.
Setting range: 500 Hz – 16 kHz
This allows you to adjust the high-range gain (amount of
boost/cut of the high frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
This allows you to determine the manner and degree to
which the volume level changes in response to your touch
on the keyboard (how hard you play). Since the volume
level of actual harpsichords and pipe organs does not
change regardless of how you play the keyboard, the normal
setting for these Voices is 127. (See the setting range below.)
Setting range: 0 – 64 – 127
0: Softest level
64: Normal touch response; optimum dynamic range
127: Loudest level; fixed (no change in response to touch)
This allows you to assign a specific function to the pedal
connected to the [1 SUSTAIN] jack.
Settings:
This allows you to assign a specific function to the pedal
connected to the [2 SOSTENUTO] jack.
Setting range: same as “Pedal 1” (above)
This allows you to assign a specific function to the pedal
connected to the [3 SOFT] jack.
Setting range: same as “Pedal 1” (above)
EQ High Frequency*
EQ High Gain*
Touch Sensitivity (Touch Sense)*
Main Set?-->
EQ HighFreq. 4.0k
NO YES
A
B
DC
Main Set?-->
EQ HighGain 0
NO YES
A
B
DC
Main Set?-->
TouchSense 64
NO YES
A
B
DC
Assigning the Pedal 1 Function
Sustain On/Off switch-type damper (page 33).
SustainCont Damper function that sustains the sound longer
the further down you press the pedal (page 33)
Sostenuto Sostenuto pedal (page 33)
Soft Soft pedal (page 33)
Expression Makes the sound softer or louder
Off No function is assigned
Assigning the Pedal 2 Function
Assigning the Pedal 3 Function
Main Set?-->
Pedal 1 SustainCont
NO YES
A
B
DC
Main Set?-->
Pedal 2 Sostenuto
NO YES
A
B
DC
Main Set?-->
Pedal 3 Soft
NO YES
A
B
DC