Filter
Top Products
Playback Control
121
The jump modes can be selected by moving the cursor to
the jump mode symbol and selecting via the [-1] and [+1] buttons,
or by using the following button combinations:
To specify the measure number you want to jump to move
the cursor to the jump location parameter and use the [-1] and
[+1] buttons or the SHIFT-Number entry method (page 34) to set
as required.
● Playback Tempo
The playback tempo can set from 25 to 300 quarter-note
beats per minute by moving the cursor to the tempo parameter
and using the [-1] and [+1] buttons or the SHIFT-Number entry
method (page 34) to set as required.
● Track Selection
Although track selection is more of a recording than a play-
back function, it is necessary to select tracks in the playback
mode for muting and solo monitoring control (below). The SONG
display shows the pattern (“Pt”), chord (“Cd”), and tempo (“Tm”)
accompaniment tracks as well as 8 of the 16 available sequencer
tracks at a time. Move the cursor to the track area and scroll left
or right to the remaining tracks (an arrow appears at either the left
or right of the track numbers to indicate that more tracks can be
accessed by scrolling in the corresponding direction). The number
of the selected track remains highlighted when the cursor is
moved to other areas of the display.
Mode Button Combination
Stop Jump [SHIFT] + [■]
Top Jump [SHIFT] + [p]
Jump Off [SHIFT] + [r] or [f]