Filter
Top Products
The Pattern Jobs
206
Lenghtens or shortens the specified track by a specified percentage
without affecting tempo or pitch.
The “TR” parameter selects the track to be affected by the Time
Stretch job: D1, D2, PC, BA, C1, C2, C3, C4.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The “Time” parameter specifies the percentage by which the time is
to be lengthened or shortened: “50%” … “200%”. The gate time of notes
in the specified track and measures will also be changed in proportion to
this setting.
After setting the parameters as required press [ENTER] to execute
the Time Stretch job. The metronome icon will appear on the display while
the data is being processed, then “Completed !” will appear briefly when
the job is done. Press the [EXIT] button to return to the job list, or a mode
button to go directly to the selected mode.
■
NOTE
• If the specified track is shortened, the phrase of the track will play repeatedly to fill
the pattern length.
• If the specified track is lengthened, the exceeding part of the phrase will be cut off.
14 : Time Stretch
First measure Last measure
First beat Last beat