Filter
Top Products
Playback Control
129
● M/S (Mute/Solo)
The Mute/Solo (“M/S”) parameters below each track num-
ber in the Drum Table display can be used to mute (turn off) or
solo (only that track will be monitored) the corresponding track.
Move the cursor to the appropriate M/S parameter, then use the [-
1] button to alternately mute or un-mute that track, or use the [+1]
button to alternately solo or un-solo the track. Any number of
tracks can be muted and/or soloed at a time. To solo more than
one track at a time hold the [SHIFT] button while soloing addi-
tional tracks after the first solo track has been specified. Also hold
the [SHIFT] button while un-soloing a single track when multiple
tracks are soloed (un-soloing a single track without holding the
[SHIFT] button will un-solo all soloed tracks).
The letter “M” appears below the number of tracks that
are muted, and the letter “S” appears when a track is soloed.
● FX THRU
These “switches” enable or bypass the effect for the cor-
responding tracks. When an FX THRU switch appears as an
empty square, the effect is enabled for that track. To bypass the
effect for a track, move the cursor to the appropriate FX THRU
switch, and press the [+1] button so that a “T” (THRU) in the
square. Bypassed tracks can be enabled by pressing the [-1] but-
ton.
■
NOTE
• The M/S parameters duplicate those in the SONG play mode and SONG
VOICE displays, and have exactly the same effect.