Filter
Top Products
The Song Voice Mode
143
Select the specific drum set to be edited by placing the cursor on the
drum set number and selecting via the [-1] and [+1] buttons or by using the
SHIFT-Number entry method. Only certain drum instruments can be edited,
and these are indicated by dots on the appropriate keys in the graphic key-
board display at the top of the display panel. Use the [OCT DOWN] and
[OCT UP] buttons to access the full range of drum instruments, and press
the corresponding micro-keyboard key to select an instrument for editing.
When a drum instrument which cannot be edited is selected, the controls
on the display appear “grayed” and cannot be accessed.
PICH (Pitch Coarse)
Adjusts the pitch of the selected drum instrument from “-64”
through “0” to “+63”. Negative values lower the pitch of the
instrument, while positive values raise the pitch of the instru-
ment.
REV (Reverb Send)
Independently adjusts the reverb send level of the selected
drum instrument from “0” (no reverb) to “127” (maximum
reverb).
VAR (Variation Send)
Independently adjusts the variation effect send level of the
selected drum instrument from “0” (no effect) to “127” (max-
imum effect) when the variation effect block is connected as a
system effect, or turns the variation effect “On (in case set to
other than 0)” or “Off (in case set to 0)” when the variation
effect block is connected as an insertion effect (see page 239
for details on the effect connections).
PAN (Pan Position)
Sets the pan position of the selected drum instrument. “Cen-
ter” is center, “Left 63” is full left, and “Right 63” is full right.
There’s also a “Random” setting in which the pan position is
set randomly.
LVL (Level)
Sets the level (volume) of the selected drum instrument from
“0” (no sound) to “127” (maximum volume).