Filter
Top Products
The Pattern Jobs
188
The “Offset” parameter allows you to change all velocity values by
an absolute amount. “-” settings will decrease the velocity of each note by
the corresponding amount, “+” settings will increase the velocity accord-
ingly. The range is from “-99” through “0” to “+99”.
New Velocity = Original Velocity x rate/100 + offset
(If the right side of the equation is 0 or less, the New Velocity
becomes 1. If the right side of the equation is 128 or more, the New
Velocity becomes 127.)
After setting the parameters as required press [ENTER] to execute
the Modify Velocity job. The metronome icon will appear on the display
while the data is being processed, then “Completed !” will appear briefly
when the job is done. Press the [EXIT] button to return to the job list, or a
mode button to go directly to the selected mode.
■
NOTE
• The Modify Velocity job is a great way to “soften” the sound of material that has too
great a variation between the softest and loudest notes, or, conversely, to add extra
punch to dull-sounding material. Experiment with the parameters to get a feel for
what they do..
96 64 32 127 96
76 44 12 107 76
116 84 52 127 116
Original
velocities
Offset = -20
Offset = +20