Filter
Top Products
24
VOICE PLAY MODE
A different modulation type and
speed can be selected for each
voice. When you play two voices in
either Dual or Split mode, the P-150
will apply the main voice modulation
type and speed setting to both
voices, and ignore any settings which
you may have made for the sub
voice. For more information about
main and sub voices, see page 25.
Note that each time you select a modulation type, a message will briefly
display in the LCD screen, as follows.
This temporary message displays the current speed level for the modulation
type that you just selected, between 0 and 7. You can easily change the
speed level for the currently selected modulation type.
CHANGING MODULATION SPEED
1.
Hold the [MODULATION] button and move the [DATA ENTRY]
slider (or press [–1/NO] or [+1/YES]).
As soon as you move the [DATA ENTRY] slider (or press [–1/NO] or
[+1/YES]) the MODULATION SPEED screen appears.
If you move the [DATA ENTRY] slider upward, the speed level increases; if
you move the [DATA ENTRY] slider downward, the speed level decreases.
A value of 7 will produce the largest number of modulations, whereas a
value of 0 will effectively turn the modulation off.
2.
Release the [MODULATION] button.
After a moment, the voice name will reappear in the screen.
Try different settings and play the keyboard and notice the difference
between high and low modulation speed level settings.
-1/NO +1/YES
PS1 PS2
DATA ENTRY
CS
HALL
STAGE
ROOM
TREMOLO
SYMPHONIC
CHORUS
REVERB MODULATION
EFFECT
+
or
MOD SPEED QE
3