Filter
Top Products
PERFORMANCE ENABLE
The Performance Enable function lets you switch between
System (“Sys”) settings and Performance (“Perf”) settings for
MIDI channel assignments, local on/off status and controller
assignments. This function lets you apply the System
settings designated in Voice Play mode to all of the
Performances.
● PERFORMANCE MIDI CHANNEL (Perf, Sys)
When Perf is selected, the MIDI transmit and receive channels
designated for the currently selected Performance will be effective. When
Sys (default) is selected, the MIDI transmit and receive channels
designated for the Voice Play mode will affect the entire system.
● PERFORMANCE LOCAL (Perf, Sys)
When Perf is selected, the Local On/Off setting designated for
the currently selected Performance will be effective. When Sys
(default) is selected, the Local On/Off setting designated for the
Voice Play mode will affect the entire system.
● PERFORMANCE CONTROL (Perf, Sys)
When Perf is selected, the controller assignments designated for
the currently selected Performance will be effective. When Sys
(default) is selected, the controller assignments designated for
the Voice Play mode will affect the entire system.
POPUP TIME
The Popup Time function lets you set the number of seconds
a temporary message displays in the screen.
The P-150 has a number of messages which appear in the
screen depending on which feature you access. By setting
the Popup Time, you can determine how long the message
stays in the screen.
You can also set the Program Change message screen to
temporarily display when you change voices or
Performances.
● PC (OFF, 1 ~ 5)
You can either turn the Program Change popup screen off or
have it display between one and five seconds. (The default
setting is Off.)
● OTHERS (1 ~ 5)
You can have all other popup screens display between one and
five seconds. (The default setting is 3.)
STORE TYPE
The Store Type function lets you designate Auto Store or
Non Auto Store status. (For information about storing, see
page 53.)
●
NON AUTO STORE
In Non Auto Store (default) status, only System, MIDI Filter and
PC Table parameters you change will automatically be stored.
Any other changes in Edit mode will cause the STORE?
(YES/NO) screen to display to prompt you for confirmation
before exiting the Edit mode. Any other changes made in Voice
Play mode and Performance Play mode will be ignored unless
you specifically perform the store operation.
● AUTO STORE
In Auto Store status, all settings you change will automatically
be stored.
When Non Auto Store is selected and Edit mode is engaged, the letter S,
P or V will appear to the right of the page number in the upper right hand
corner to indicate which type of parameters you are editing System,
Performance or Voice parameters, respectively.
Channel, Local, CS FC and PS settings are basically classified as
Performance parameters, though they are treated as System parameters
when Sys is selected for MIDI Channel, Local or Controller Assign in the
Performance Enable function (System Menu); see left. When Sys has
been selected, the letter S will appear to the right of the page number,
replacing the letter P.
PERF.MIDI CH 5
sys/ sys/ sys
PERF.CTRL. 5
sys/ sys/ sys
POPUP TIME 6
PC=off OTHERS= 3
PERF.LOCAL 5
sys/ sys/ sys
POPUP TIME 6
PC=off OTHERS= 3
STORE TYPE 7
auto store
45
EDIT MODE