Filter
Top Products
Using Your Instrument with
Other Devices
PSR-3000/1500 Owner’s Manual
190
2 Playing External Audio Devices with
the Built-in Speakers
The stereo outputs from another instrument can be con-
nected to these jacks, allowing the sound of an external
instrument to be reproduced via the instrument’s speak-
ers. Connect the output jacks (LINE OUT etc.) of an
external synthesizer or the tone generator module and
the instrument’s AUX IN [L/L+R]/[R] jacks using appro-
priate audio cables.
n
• Use only the [L/L+R] jack for connection with a monaural device.
•The instrument’s [MASTER VOLUME] setting affects the input
signal from the [AUX IN] jacks.
3 Showing the Instrument’s Display
Contents on a Separate TV Monitor
(PSR-3000)
Connect the instrument to an external TV monitor, and
you can have the current display contents or lyrics (for
group sing-alongs and the like) displayed on the TV. For
instructions on connecting, see page 55.
4 Connecting a Microphone
or Guitar ([MIC./LINE IN]
jack) (PSR-3000)
By connecting a microphone to the [MIC./LINE IN] jack
(standard 1/4" phone jack) located on the left underside
of the instrument, you can enjoy singing along with
Song playback (KARAOKE) or with your own perfor-
mance. The instrument outputs your vocals or guitar
sounds through the built-in speakers. For instructions on
connecting, see page 54. Please note that when con-
necting devices of high output level, make sure to set
the [MIC. LINE] switch to “LINE.”
CAUTION
When the sound of an external device is output to the
instrument, first turn on the power to the external device,
then to the instrument. Reverse this order when you turn
the power off.
LINE OUT
R
L/L+R
AUX IN
Instrument
Synthesizer
Tone generator
Phone plug
(standard)
Audio cable
Pin plug
n
• Set the NTSC or PAL to correspond to the standard used by
your video equipment.
• When LYRICS is selected as the contents of the Video Out
signal, only the lyrics of the song are output via VIDEO
OUT, regardless of the display that is called up on the
instrument.
•Avoid looking at the television or video monitor for pro-
longed periods of time since doing so could damage your
eyesight. Take frequent breaks and focus your eyes on dis-
tant objects to avoid eyestrain.
Video out settings
1 Call up the operation display.
[FUNCTION] → [G] VIDEO OUT
2 Select the video equipment standard “NTSC”
or “PAL” by using the [1
ππ
ππ
††
††
] button. Select
the contents of the Video Out signal—the
current display contents (LCD) or lyrics (LYR-
ICS)—by using the [3
ππ
ππ
††
††
]/[4
ππ
ππ
††
††
] buttons.
Connecting Audio & Video Devices