Filter
Top Products
Using, Creating and Editing Voices
Voice Creating—Sound Creator
PSR-3000/1500 Owner’s Manual
98
● VIBRATO
EFFECT/EQ
1. REVERB DEPTH/CHORUS DEPTH/DSP DEPTH
2. DSP
3. EQ
HARMONY
Same as in the [FUNCTION] → [F] HARMONY/ECHO display. See page 83.
Vibrato:
A quavering, vibrating sound
effect that is produced by regu-
larly modulating the pitch of the
Voice.
DEPTH Determines the intensity of the Vibrato effect. Higher settings result
in a more pronounced Vibrato.
SPEED Determines the speed of the Vibrato effect.
DELAY Determines the amount of time that elapses between the playing of
a key and the start of the Vibrato effect. Higher settings increase the
delay of the Vibrato onset.
REVERB DEPTH Adjusts the reverb (page 91) depth.
CHORUS DEPTH Adjusts the chorus (page 91) depth.
DSP DEPTH Adjusts the DSP (page 91) depth.
If you want to re-select the DSP type, you can do so in the DSP
menu explained on page 98.
DSP ON/OFF Determines whether the DSP is on or off.
PANEL SUSTAIN Determines the sustain level applied to the edited voice when the
SUSTAIN is set to ON from the VOICE EFFECT display.
DSP TYPE Selects the DSP effect category and type. Select a type after select-
ing a category.
VARIATION Two variations are provided for each DSP type.
Here, you can edit the VARIATION on/off status and variation-
parameter value setting.
ON/OFF
The factory-programmed assignments are set to variation-off for
all Voices (standard variation of DSP is assigned). If you select
VARIATION ON here, a variation of the DSP effect is assigned to
the Voice. The variation parameter value can be adjusted in the
VALUE menu explained below.
PARAMETER
Displays the variation parameter.
VALUE
Adjusts the value of the DSP variation parameter.
EQ LOW/HIGH These determine the Frequency and Gain of the Low and High EQ
bands.
DEPTH
SPEED
DELAY
Level
Time