Filter
Top Products
■ SETTING THE OUTPUT LEVELS - You can designate the output level for
each pad in a User drum kit. Hold [MODE] and press [PAGE+] or [PAGE-] to
access the output Level function. The word “LEVEL” will appear in the lower
left area of the LCD, and the level setting of the currently selected pad will
be flashing. Press any drum pad (within either the Drum or Percussion Pad
Bank) to select it. Press [-1] and [+1] to change the level setting from
between “01” and “16”. (As you change the level value, you can hit the pad
in order to hear the effect of the level change.) After you’ve set the level for
the first pad, simply select a different pad and repeat the procedure until
you have set the levels for all voices in your User drum kit.
■ SETTING THE ACCENT LEVELS - You can designate the accent level for
each pad in a User drum kit. Hold [MODE] and press [PAGE+] or [PAGE-] to
access the Accent level function. The word “ACCENT” will appear in the
lower left area of the LCD, and the level setting of the currently selected
pad will be flashing. Press any drum pad (within either the Drum or
Percussion Pad Bank) to select it. Press [-1] and [+1] to change the accent
level setting from between “-7” and “+7”. (As you change the accent level
value, you can hold [ACCENT] and hit the pad in order to hear the effect of
the accent level change.) After you’ve set the accent level for the first pad,
simply select a different pad and repeat the procedure until you have set
the accent levels for all voices in your User drum kit.
The output volume of each pad will depend on its output Level setting, plus the Accent level value
when an accent is applied.
ENTER
ENTER
59
MODES & FUNCTIONS
PDF03_E.qx 6/2/99 5:51 PM Page 59