Yamaha RY9 Musical Instrument User Manual


 
ENTERING EXTERNAL IN MODE - Hold [MODE] and press [EXT IN] to enter
External In Mode.
SELECTING A FUNCTION - Hold [MODE] and press [PAGE+] and [PAGE-] to
step through the various functions. The LCD will display information about
the status of each function as you step through them.
TURNING THE MIX FUNCTION ON AND OFF - When the Mix function is
turned on, the guitar signal you play will be mixed with the patterns/songs,
and both will be output via the stereo [OUTPUT] jacks and [PHONES] jack.
Hold [MODE] and press [PAGE-] once or more, if necessary, to access the
Mix function. The word “MIX” will appear in the lower left area of the LCD,
along with the current Mix function status— “ON” or “OFF”. Press [+1] to
turn the Mix function on. Press [-1] to turn the Mix function off.
To determine the volume level of the guitar, adjust the guitar’s volume knob.
ENTER
TOM1
BD1 BD2 SD1 SD2 CRASH
TOM2 TOM3 CLOSED1
CLOSED2
HH
OPEN
HH
HH
RIDE
ACCENT MODE
PATTERN
PAGE PAGE MUTE BALANCE TRANS-
POSE
SONG KIT EXT IN SYSTEM TEMPO
DELETE
AUDITION
CHORD
PAD BANK
ENTER
2 3 4 510
8 9 10 1176
TOM1
BD1 BD2 SD1 SD2 CRASH
TOM2 TOM3 CLOSED1
CLOSED2
HH
OPEN
HH
HH
RIDE
ACCENT MODE
PATTERN
PAGE PAGE MUTE BALANCE TRANS-
POSE
SONG KIT EXT IN SYSTEM TEMPO
DELETE
AUDITION
CHORD
PAD BANK
ENTER
2 3 4 510
8 9 10 1176
62
MODES & FUNCTIONS
PDF03_E.qx 6/2/99 5:51 PM Page 62