Filter
Top Products
4.
Press the [PLAY] key.
The [PLAY] key lights up and the pattern is played repeatedly. During playback, the
[TEMPO] key flashes in sync with the tempo. The display shows the current position in the
pattern (measure/beat).
• While a pattern is playing, you can also manually play the pads.
• While a pattern is playing, you can also switch to a different bank and pattern number. The new
pattern will begin playing as soon as you switch to it.
5.
To stop pattern playback, press the [STOP] key.
If you press the [PLAY] key instead of the [STOP] key, the unit goes into pause mode, and
the [PLAY] key flashes. If you press the [PLAY] key again in this condition, playback
resumes from the same position.
Changing the Tempo of Pattern Playback
In pattern mode, you can adjust the play tempo in the range of 40 – 250 BPM (quarter note beats
per minute).
1.
Press and hold the [TEMPO] key.
The [TEMPO] key lights up and the current tempo is shown on the display.
2.
While keeping the [TEMPO] key depressed, use the [VALUE +/-] keys to adjust the
tempo.
114
112
Tempo value (BPM)
HINT
0 1-3
Beat Measure
Using Patterns (Pattern Mode)
ZOOM MRT-3
15